|
|
|
|
|
Brake pad |
||
 |
||
attendant technologies
Continuous plunge cut grinding - Type DDS |
||
|
In this grinding process the workpieces are guided through the grinding wheels with the aid of a transport plate. The plunge cut is accomplished separately for each workpiece.
|
 |
|
Continuous plunge cut grinding - Type DDS |
||
|
In this grinding process the workpieces are guided through the grinding wheels a number of times with the aid of a transport plate. A plunge cut is accomplished during each pass until the final dimension is reached.
|
 |
|
Continuous plunge cut grinding - Type DDW |
||
|
In this grinding process the workpieces are guided through the grinding wheels with the aid of a transport plate. The plunge cut is accomplished separately for each workpiece.
|
 |
|
Continuous plunge cut grinding - Type DSR2 |
||
|
In this grinding process the workpieces are guided beneath the grinding wheels with the aid of a transport plate. The plunge cut is accomplished separately for each pair of workpieces. The special feature is that workpieces with different heights (increments) can be ground.
|
 |
|
Plunge cut grinding (with oscillation) – Type DHS |
||
|
In this grinding process the workpieces are guided beneath the movable grinding wheel with the aid of a charging unit. The plunge cut is accomplished with oscillation while the workpiece is beneath the grinding wheel.
|
 |
|
Plunge cut grinding (with oscillation) – Type DS bottom |
||
|
In this grinding process the workpieces are guided to the grinding wheel with the aid of a guide. The plunge cut is accomplished separately on each workpiece while the grinding wheel oscillates.
|
 |
|
Plunge cut grinding (with oscillation) – Type DS top |
||
|
In this grinding process the workpieces are guided beneath the grinding wheel with the aid of a guide. The plunge cut is accomplished separately on each workpiece while the grinding wheel oscillates.
|
 |
|
Plunge cut grinding (with oscillation) – Type DW |
||
|
In this grinding process the workpieces are guided against the grinding wheel with the aid of a guide. The plunge cut is accomplished separately on each workpiece while the grinding wheel oscillates.
|
 |
|
Plunge cut grinding with carriage (with oscillation) – Type DDW |
||
|
In this grinding process the workpieces are guided between the grinding wheels with the aid of a carriage. The plunge cut is accomplished with oscillation while the workpiece is between the grinding wheels.
|
 |
|
Plunge cut grinding with rocker arm (with oscillation) – Type DDW |
||
|
In this grinding process the workpieces are guided between the grinding wheels with the aid of a rocker arm. The plunge cut is accomplished with oscillation while the workpiece is between the grinding wheels.
|
 |
|