|
|
|
|
Cage |
||
![]() |
attendant technologies
Plunge cut grinding (with oscillation) – Type DHS |
||
In this grinding process the workpieces are guided beneath the movable grinding wheel with the aid of a charging unit. The plunge cut is accomplished with oscillation while the workpiece is beneath the grinding wheel.
|
![]() |
Plunge cut grinding (with oscillation) – Type DS bottom |
||
In this grinding process the workpieces are guided to the grinding wheel with the aid of a guide. The plunge cut is accomplished separately on each workpiece while the grinding wheel oscillates.
|
![]() |
Plunge cut grinding (with oscillation) – Type DS top |
||
In this grinding process the workpieces are guided beneath the grinding wheel with the aid of a guide. The plunge cut is accomplished separately on each workpiece while the grinding wheel oscillates.
|
![]() |
Plunge cut grinding (with oscillation) – Type DW |
||
In this grinding process the workpieces are guided against the grinding wheel with the aid of a guide. The plunge cut is accomplished separately on each workpiece while the grinding wheel oscillates.
|
![]() |
Plunge cut grinding (without oscillation) - Type DS top |
||
In this grinding process the workpieces are guided beneath the grinding wheel with the aid of a guide. The plunge cut is accomplished separately for each workpiece.
|
![]() |
Plunge cut grinding (without oscillation) - Type DW |
||
In this grinding process the workpieces are guided against the grinding wheel with the aid of a guide. The plunge cut is accomplished separately for each workpiece.
|
![]() |
Plunge cut grinding with carriage (with oscillation) – Type DDW |
||
In this grinding process the workpieces are guided between the grinding wheels with the aid of a carriage. The plunge cut is accomplished with oscillation while the workpiece is between the grinding wheels.
|
![]() |
Plunge cut grinding with carriage (without oscillation) – Type DDW |
||
In this grinding process the workpieces are guided between the grinding wheels with the aid of a carriage. The plunge cut is accomplished while the workpiece is between the grinding wheels.
|
![]() |
Plunge cut grinding with rocker arm (with oscillation) – Type DDW |
||
In this grinding process the workpieces are guided between the grinding wheels with the aid of a rocker arm. The plunge cut is accomplished with oscillation while the workpiece is between the grinding wheels.
|
![]() |