Diskus double surface lateral grinding machine with vertical spindles.
 
This machine type consists of a steel-welded box frame design, which has higher flexural strength than a comparable portal machine. It has two vertical, directly motor-driven spindles located on the same axis, with liquid cooling. Each of these spindles is driven by 23 kW to 48 kW. They are attached to compact slides with self-aligning bearings, which perform all infeed and return motions using precision screw drives.
The machine type required for your application can be used as a plunge cut as well as through-feed machine. The planetary gear drive provided allows a number of workpieces to be machined simultaneously with controlled rotation. The grinding tools infeed using the plunge cut method while positioned in a planetary gear rotating around its own axis. The same machine can be used for through-feed by replacing the transport plates.

Diskus double surface grinding machine with horizontal spindles. This machine type is a steel-box frame welded construction with two opposing horizontal grinding spindles with the same axis. These are directly driven, liquid cooled motor driven spindles whose main spindle drives each have a motor output of 24 kW to 100 kW. Various types of workpiece transport are possible. Linear workpiece feed can also be selected, depending on the workpiece geometry. In this case, the workpieces are fed and guided with the help of guide rails for the grinding tools. At the discharge, Diskus's own ionic 100 % measuring control measures each part. The measuring results from this post-process measuring control are transferred to the SIEMENS 840D machine control and used for automatic correction as required.